একদম নতুন দেখতেই পাচ্ছেন - কোনো প্রকার সমস্যা নেই আমি মূলত ২ টা মাদারবোর্ড অর্ডার দিয়ে ফেলি একটি মাদারবোর্ড আমি নিজে use করতেছি - আরেকটি মাদার বোর্ড এই যে - যেটা আমি সেল করতে চাচ্ছি - কেউ নিলে নামবার অথবা মেসেজ করুন ' একদম
( New Fresh Condition ) অাছে চেক করে দেখে শুনে নিয়ে যেতে পারেন !
model : Gigabyte GA-A320M-S2H AMD Micro ATX Motherboard
Supported CPU
AMD Ryzen™ processor
AMD 7th Generation A-series/ Athlon™ processor
AMD A320
BIOS
1 x 128 Mbit flash
Use of licensed AMI UEFI BIOS
PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Form Factor
Micro ATX Form Factor; 24.4cm x 19.5cm
Memory
Type
Dual channel memory architecture
Slots
2 x DDR4 DIMM
Supported Memory
Support for DDR4 3200(O.C.)/2933(O.C.)/2667*/2400/2133 MHz memory modules
* Actual support may vary by CPU.
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules
Maximum Memory
32 GB
Graphics
Graphics
1 x D-Sub port, supporting a maximum resolution of 1920x1200@60 Hz
1 x DVI-D port, supporting a maximum resolution of 1920x1200@60 Hz
* The DVI-D port does not support D-Sub connection by adapter.
1 x HDMI port, supporting a maximum resolution of 4096x2160@24 Hz
* Support for HDMI 1.4 version.
Max Shared Memory
2 GB
1 x HDMI port
USB (s)
Chipset:
2 x USB 3.1 Gen 1 ports available through the internal USB header
6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers)
CPU:
4 x USB 3.1 Gen 1 ports on the back panel
LAN Port (s)
Realtek® GbE LAN chip (10/100/1000 Mbit)
1 x M.2 connector (Socket 3, M key, type 2242/2260/2280/22110 SATA and PCIe x4/x2* SSD support)
* Actual support may vary by CPU.
* Supports only M.2 SATA SSDs when using an AMD Athlon™ 200-series/ 7th Generation A-series or Athlon™ APU.
4 x SATA 6Gb/s connectors
Support for RAID 0, RAID 1, and RAID 10
* Refer to "1-7 Internal Connectors," for the installation notices for the M.2 connector.
Audio
Realtek® ALC887 codec
High Definition Audio
2/4/5.1/7.1-channel
* To configure 7.1-channel audio, you have to use an HD front panel audio module and enable the multi-channel audio feature through the audio driver.
Support for S/PDIF Out
