Projector Repair

Macbook Repair Near এর মাধ্যমে বিক্রির জন্য১৫ এপ্রিল ৯:৪৯ পিএমধানমন্ডি, ঢাকা


We can refurbish your projector to its full functionality and restore it to its factory specs. Based on our experience, projectors which are heavily used can suffer from power issues, cooling issues, and image discoloration. Whether the unit needs new polarizing filters, mirrors, fans, or bulbs, we can help. We are a warranty service center for Panasonic, Sanyo, and Eiki, and a high volume projector service center for Sony, NEC, Epson, Dell, Barco, BenQ, Optoma, InFocus, and Christie Projectors. We only recommend service on mid-range and high-range projectors, exceeding $700 in replacement value. We especially recommend repair for high-lumen projectors, as these units are very expensive to replace and are built to last.

Don’t Replace your Lamp!
Many repairs come to our facility after the owner has attempted to replace the lamp, only to find that the new projector lamp did not improve prior issues. Often times, end users may attempt to replace the lamps with cheap knock-off “OEM” lamps – these lamps can cause power fluctations that damage internal components and cause more damage over the long term.

Institutional Relationships
We frequently work with universities, colleges, school districts, non-profits, churches, and other corporate entities to do large cleaning and refurbishment projects. If you have more than 10 projectors that need cleaning or repair, please let us know, as we are one of only a few national facilities capable of handling large quantity orders in a timely fashion.
Common Projector Repair Issues
Discolored Projector Image
Projector image discoloration is one of the most common issues, and is not resolved by replacing your projector lamp. If your projector shows a yellow, red, purple, or blue tint along all or part of your image, it needs to be professionally serviced. A discolored image means that there is an issue with the color wheel (DLP projectors) or polarizing plates (LCD projectors). If caught early on LCD projectors, this repair only requires cleaning, labor, and recallibration of the color module. If you wait too long, this repair involves replacement of the polarizing plates or prism assembly which can be quite expensive.
Dust, Specks, and Dark Spots on Projector Image
Projectors require cleaning and maintenance. Failure to do so on an annual or semi-annual basis can lead to dust within the optical section which will show up as dots or specks on your projector image. If the dots are a tinted color or hue, this means that the dust has settled on the color module, which means that the polarizing plates need to be cleaned (lcd projector) or the color wheel needs to be cleaned (dlp projector). Less commonly, this could also be a result of a damaged dlp chip (from being dropped or otherwise), or a damaged section in the prism assembly or optical block.
Projector Won’t Power On & Other Projector Power Issues
If your projector unexpectedly shuts off or won’t power on, there may be an issue with the power supply, ballast, software, or cooling system. In some cases, there may be damage to the internal circuit boards. This repair will involve pinpointing the cause of the problem, along with a thorough cleaning of hard to reach cooling channels. This is not a user serviceable repair.
Projector Has Blinking Light
A constantly blinking green or red status light may indicate one of a few system messages. Depending on the make and model of the projector, a blinking status light may mean it’s time to replace the lamp, the projector is over-heating, or needs to be cleaned. If the status light is accompanied by a power-on issues, then this may be indicative of more significant issues such as main board failure, ballast failure, or needs replacement fans.
Part of Projector Image is Black or Missing
If you have a DLP projector, a broken DLP chip is the likely cause and will require a replacement. On all projectors, this could be the result of damage to the prism assembly or optical block.
Projector Image is Dull or Dim
The likely culprit of a dim projector is the bulb. High bulb hours will require a replacement of the bulbs in the unit. While replacing the lamp can be done by the end user, it is important to realize that the lamp is usually one of the last things that needs to be replaced. We recommend replacing bulbs after 3000 hours of use, which is well outside the annual use range for most recreational projector users. replacing the lamps when needed. Just because a website claims that they sell ‘OEM lamps’ does not mean that
No Inputs Recognized by Projector
The issue could be either software or hardware. Try switching to a different input, for example, use your laptop to plug into the VGA or HDMI port you previously were not using. Make sure that your projector is on the right display mode. Sometimes, broken remotes or broken buttons on the projector will prevent you from switching to the correct input, so test


সেবার ধরণ:
ইলেকট্রনিক্স ও ইঞ্জিনিয়ারিং
অভিযোগ করুন

যোগাযোগ করুন

  • ০১৮৩৭২৯২৮২৮
  • ০১৭১৫২৪০০০৮
  • ০১৯৭৫২৪০০০৮
  • ০১৭৩৭২৯২৮২৮
  • ০১৮৭২৯২৮২৮

 

নিরাপদ থাকুন!

  • সর্বদা বিক্রেতার সাথে সরাসরি দেখা করবেন
  • আপনি যা কিনতে যাচ্ছেন তা দেখার পূর্বে কোনো টাকা পরিশোধ করবেন না
  • অচেনা কারও নিকট টাকা পাঠাবেন না

দেখুন:

  • অবাস্তব মূল্য
  • অতিরিক্ত ফি
  • অগ্রিম অর্থ প্রদানের অনুরোধ
  • ব্যক্তিগত তথ্যের জন্য অনুরোধ

নিরাপদে থাকার আরও কিছু কৌশল

এই মেম্বারের পেইজ ভিজিট করুন
Macbook Repair Near

All types of Laptop & tab here



বিজ্ঞাপনটি শেয়ার করুন
এই বিজ্ঞাপনটি প্রচার করুন

Macbook Repair Near থেকে আরও বিজ্ঞাপন