Netis P110C 8POE+2RJ45 100M Standard POE Switch
Hardware
Interface 8*10/100Mbps POE ports(Data/Power)
2*10/100M uplink RJ45 ports (Data)
Basic function
Follow IEEE 802.3 Ethernet and IEEE802.3u Fast Ethernet Protocol
Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
Store-and-forward switching scheme
Support IEEE802.3X full duplex and Backpressure half duplex
MAC address auto-learning & auto-aging
Standards
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3i 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3af/at, Power over Ethernet
IEEE 802.3x Flow Control
Mode
Normal switch mode/Extend mode
Data Transfer Rate
Etherent:10Mbps(Half-duplex);20Mbps(Full-duplex)
Fast Entherent:100Mbps(Half-duplex);200Mbps(Full-duplex)
Store & Forwarding
Yes
Switching Capacity
2G
MAC Address
Table Size
2K
Jumbo Frame
2048 byte
Environment
Operation Temperature:0℃~40℃
Storage Temperature:-40℃~70℃
Operation Humidity:10%~90% RH Non-condensing
Storage Humidity:5%~90% RH Non-condensing
Power Input POE
Standards
Single port maximum power 30W,
Whole switch maximum power 120W
Support over-current,over-voltage and short-circuit protection
Support Soft Start of High Power PD
Support sequential boot-up
Power Supply Pin:12+/36-
AC 110~240V 50/60HZ
Cabling type
100Base-TX: Cat 5e or better UTP/STP(≤100m)
10Base-TX: Cat 5e or better UTP/STP(≤250m)
Dimensions
(L x W x H )
190mm*140mm*43mm